shielded power inductors C lps5015 document 585-1 document 585-1 revised 08/01/13 dcr srf i sat (a) 5 i rms (a) 6 inductance 2 max 3 typ 4 10% 20% 30% 20c 40c part number 1 20% (h) (ohms) (mhz) drop drop drop rise rise lps5015-102mr_ 1.0 0.050 183 3.6 3.8 3.9 1.90 2.65 lps5015-132mr_ 1.3 0.065 150 2.5 2.6 2.8 1.70 2.35 lps5015-182mr_ 1.8 0.075 128 2.6 2.8 2.9 1.50 2.15 lps5015-222mr_ 2.2 0.090 116 2.4 2.6 2.7 1.40 2.00 lps5015-332mr_ 3.3 0.125 88 1.9 2.0 2.0 1.30 1.80 lps5015-472mr_ 4.7 0.150 73 1.6 1.7 1.8 1.20 1.62 lps5015-562mr_ 5.6 0.175 67 1.6 1.6 1.6 1.10 1.45 lps5015-682mr_ 6.8 0.225 57 1.3 1.4 1.5 0.90 1.25 lps5015-822mr_ 8.2 0.280 49 1.3 1.3 1.4 0.85 1.05 lps5015-103mr_ 10 0.300 44 1.2 1.3 1.3 0.80 0.95 lps5015-123mr_ 12 0.350 40 1.0 1.1 1.2 0.75 0.84 lps5015-153mr_ 15 0.360 38 0.80 0.84 0.86 0.73 0.84 lps5015-183mr_ 18 0.550 35 0.75 0.77 0.80 0.70 0.83 lps5015-223mr_ 22 0.675 31 0.70 0.73 0.75 0.60 0.82 lps5015-333mr_ 33 0.750 24 0.55 0.59 0.60 0.50 0.70 lps5015-473mr_ 47 1.00 18 0.46 0.48 0.49 0.45 0.57 lps5015-563mr_ 56 1.13 17 0.40 0.43 0.45 0.40 0.52 lps5015-683mr_ 68 1.45 15 0.33 0.38 0.39 0.35 0.47 lps5015-104mr_ 100 1.95 12 0.30 0.33 0.34 0.30 0.42 lps5015-124mr_ 120 2.50 10 0.25 0.28 0.30 0.27 0.37 lps5015-154mr_ 150 3.40 9.3 0.23 0.25 0.26 0.25 0.33 lps5015-224mr_ 220 4.50 7.3 0.20 0.21 0.22 0.22 0.29 lps5015-334mr_ 330 7.40 5.7 0.15 0.17 0.18 0.17 0.22 lps5015-474mr_ 470 7.50 4.9 0.12 0.12 0.13 0.16 0.21 lps5015-564mr_ 560 8.50 4.3 0.10 0.11 0.12 0.14 0.190 lps5015-684mr_ 680 10.6 4.0 0.10 0.11 0.11 0.13 0.175 lps5015-105mr_ 1000 15.0 3.2 0.080 0.090 0.093 0.10 0.150 lps5015-155mr_ 1500 25.0 2.5 0.080 0.086 0.088 0.090 0.140 lps5015-185mr_ 1800 28.0 2.2 0.078 0.083 0.086 0.085 0.130 lps5015-225mr_ 2200 36.0 2.1 0.072 0.078 0.080 0.065 0.090 ? very low dcr; excellent current handling ? 5.0 5.0 mm footprint; less than 1.5 mm tall designers kit c350 contains 3 each of all values core material ferrite core and winding loss see www.coilcraft.com/coreloss environmental rohs compliant, halogen free terminations rohs compliant matte tin over nickel over silver. other terminations available at additional cost. weight 102 C 107 mg ambient temperature C40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 1000/7 reel; 3500/13 reel plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth recommended pick and place nozzle od: 5 mm; id: 2.5 mm pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf . 1. please specify termination and packaging codes: lps5015-335m rc termination: r = rohs compliant matte tin over nickel over silver. special order, added cost: q = rohs tin-silver-copper (95.5/4/0.5) or p = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape 1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (3500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms using an agi - lent/hp 4192a. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equivalent. 5. dc current that causes the specifed inductance drop from its value without current. 6. current that causes the specifed temperature rise from 25c ambient. 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2014 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
shielded power inductors C lps5015 series document 585-2 typical l vs current typical l vs frequency typical current derating 1 10 10000 1000 100 0.01 0.1 11 0 frequency (mhz) inductance (h) 10 h 3.3 h 33 h 1000 h 3300 h 330 h 100 h 1 10 10000 1000 100 0.01 0.1 11 0 current (a) inductance (h) 3.3 h 33 h 330 h 1000 h 3300 h 100 h 10 h -40 -20 02 04 06 08 0 100 140 120 a mbient t emperatur e (c) pe r cent of r ated c urrent 120 110 100 90 80 70 60 50 40 30 20 10 0 i sat i rm s 25 c dimensions are in inches mm document 585-2 revised 08/01/13 0.197 5,00 0.134 3,40 0.134 3,40 0.134 3,40 0.060 1,52 0.197 5,00 0.0665 1,689 recommended land pattern 0.134 3,40 0.189 0.003 4,80 0,076 0.0551 0.004 1,4 0,1 winding direction dash number internal code xxx x 0.189 0.003 4,80 0,076 * * 0.060 1,50 0.039 1,00 typ typ 0.039 1,00 * dimensions are of the case not including the termination. for maximum overall dimensions including the termination, add 0.005 i n/0,13 mm. for optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. dimensions before mounting can be an additional 0.005 inc h/0,13 mm). * packaging 1000/7 ff reel; 3500/13 f reel plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth ote ew part orietatio parts are rotated 90 in the packaging tape compared to previous versions of this product. new old 123 123 123 123 123 123 us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2014 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
